Skip to main content

Write a short note on technical design aspect of multimedia.

By
Technological factors may limit the ambition of our multimedia presentation.
Technical parameters that affect the design and delivery of multimedia applications
1. Video Mode and Computer Platform:
There are many "portable", "cross-platform" software and "run-time modules", but many of them lose quality/performance during the translation.

2. Memory and Disk Space Requirement:
Rapid progress in hardware alleviates the problem.

 3. Delivery:
Live Presentation 
1.Short checking list for hardware/software requirements: 
2.Type of graphics card
3.Video memory (1 MB, 2 MB, 4 MB, etc.) 
4.Access time of hard disk (important for real-time video) 
5.Type of sound card (support for General MIDI) 
6.Audio-video software

 Delivery by diskette
Small in size, slow to install.

 Delivery by CD-ROM
Large capacity: Access time of CD-ROM drives is longer than hard-disk drives.

 Electronic Delivery (ftp, www, etc.)
Depends on baud rate, network connection, and monthly bill.

Comments

Post a Comment

Popular posts from this blog

Explain the backing up and restoring files in Linux.

By
9.Explain the backing up and restoring files in Linux. Ans. 1. Backing-up and restoring files is done only by system administrator. 2. Because of built-in features, Linux doesn’t allow users to back-up their own files to removable disks. 3. It’s not enough to know that performing backup is your job, you need to formulate a strategy to making sure your system is not vulnerable to sudden disastrous disruptions. 4. If you have a high capacity tape drive and several good set of restore disks you can take backup every few days. 5. If you are managing a system with scores of users, you might find it more sensible to back up accounts and system configurations. 6. Only you can decide ‘what’ to backup, you need to decide ‘how frequently’ to perform backups, whether to maintain series of incremental backup. 7. You should maintain perfect backups without ever needing to restore to them, this means encouraging users to keep multiple copies of their important files in their ho...
Post a Comment
Read more

Explain the file systems supported by Linux.

By
21.Explain the file systems supported by Linux. Ans. 1. Linux can read/write to several file system that originated with other operating system much different from Linux. 2. One reason that Linux supports so many file systems is the design of its virtual file system (VFS) layer, its provides a fairly universal forms of file support, file systems supported by Linux are as follows: 3. ext3: • Ext3 stands for third extended file system. • Starting from Linux Kernel 2.4.15 ext3 was available. • The main benefit of ext3 is that it allows journaling. • Journaling has a dedicated area in the file system, where all the changes are tracked. • When the system crashes, the possibility of file system corruption is less because of journaling. (If no journaling, then fsck command (file system consistency check) is used to check for the corrupted file and to repair that file). • ext3 keeps a record of uncommitted file transactions and applies only those transactions when the sy...
Post a Comment
Read more

Explain the rc script and how they can be managed by manually.

By
18.Explain the rc script and how they can be managed by manually. Ans. 1. ‘rc’ scripts are stored in ‘/etc/rc.d’ directory, rc scripts are used to stop and start services for runlevels. 2. In ‘/etc/rc.d’ directory we have some additional directories rc0.d, rc1.d, rc2.d, rc3.d, rc4.d, rc5.d and rc6.d, the numbers in directory name corresponds to the runlevel and contains the scripts for runlevels. 3. For example let’s take runlevel 5, init program looks in the ‘/etc/rc.d/rc5.d/’ directory for the processes to start and stop. 4. All the scripts in the rc5.d directory are symbolic like to the actual scripts that are located in the ‘/etc/rc.d/init.d/’ directory. The use of symbolic link means that the runlevel can be modified by adding or removing symlinks or changing the order the script run. 5. rc scripts contains symbolic links which can be modified to change the runlevels. 6. Symbolic links begins with a ‘k’ and a number or an ‘s’ and a number. Example: S25netfs -...
Post a Comment
Read more